| After-sales Service: | 24 Hours Service/7days Per Week |
|---|---|
| Warranty: | 12 Months |
| Structure: | Vertical Drilling Machine |
| Layout: | Vertical |
| Controlling Mode: | CNC |
| Number of Shaft: | 8 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Best Price Gantry Moveable Swz Series CNC 3D H Beam Drilling Machine
1.The machine is mainly used for the drilling processing of H-shape steel, box beam and channel steel of steel structure, bridge, three dimensional garage and petrol platform
i. The machine tool is mainly composed of bed, gantry, headstock, electrical system, hydraulic system, cooling chip removal system, detection system, etc.
ii. The machine adopts the form of gantry moving and fixed worktable, which can reduce the bed length and save the floor area.
iii. The gantry motion (x-axis) is driven by linear ball guide, AC servo motor and low backlash rack and pinion. Linear ball guide, AC servo motor and ball screw drive are used to guide the movement of gantry crossbeam and sliding plate on two vertical columns (U, V, w). The feed motion of each drilling head (axis 1, 2 and 3) is guided by linear roller guide, driven by servo motor and roller screw. iv. The spindle box adopts the CNC feed drilling power head produced by our company.
v. The bottom of the machine tool is equipped with a flat chain type chip remover, and the chip conveyor is equipped with a water pump and a cooling liquid filtration circulating device.
vi. The hydraulic system is mainly used for X-axis positioning and locking and balancing of power heads on both sides. The electrical system is controlled by PLC and equipped with upper computer. The workpiece is input and stored by computer, so it is easy to operate
TECHNICAL INFORMATION:
|
Dimension of machining workpiece
|
Maximum length of workpiece
|
21m
|
|
Maximum section size of workpiece (width × height)
|
1000×1000mm
|
|
|
Minimum section size of workpiece (width × height)
|
300×300mm
|
|
|
Bed table (fixed)
|
Height of worktable from the ground
|
900mm
|
|
Width of T-slot on worktable
|
28mm
|
|
|
Gantry longitudinal movement (x-axis)
|
X-axis stroke
|
21m
|
|
X-axis drive mode
|
AC servo motor, low backlash reducer, double drive rack and pinion pair, with hydraulic locking
|
|
|
Maximum moving speed of x-axis
|
8m/min
|
|
|
X-axis servo motor power
|
2×3.0kW
|
|
|
Lateral movement of power head on gantry beam (v-axis)
|
V-axis stroke
|
1500mm
|
|
V-axis drive mode
|
AC servo motor, ball screw drive
|
|
|
Maximum moving speed of v-axis
|
8m/min
|
|
|
V-axis servo motor power
|
1.5kW
|
|
|
Vertical movement of power head on double column of gantry (U-axis, W-axis)
|
U-axis, W-axis stroke
|
1500mm
|
|
U-axis, W-axis drive mode
|
AC servo motor, ball screw drive, hydraulic cylinder balance
|
|
|
Maximum movement speed of U-axis and W-axis
|
8m/min
|
|
|
U-axis, W-axis servo motor power
|
2×1.5kW
|
|
|
Table type drilling (sliding head)
|
Quantity
|
3
|
|
Maximum borehole diameter
|
ф50mm
|
|
|
Spindle speed (frequency conversion 30-100Hz)
|
120-400r/min
|
|
|
Morse taper of spindle
|
4
|
|
|
Spindle motor power
|
3×7.5kW
|
|
|
Axial stroke (1 axis, 3 axis)
|
600mm
|
|
|
Axial stroke (2-axis)
|
700mm
|
|
|
1-axis, 2-axis, 3-axis drive mode
|
AC servo motor, ball screw drive
|
|
|
1-axis, 2-axis, 3-axis feed rate
|
0-4000mm/min
|
|
|
1-axis, 2-axis, 3-axis servo motor power
|
3×1.5kW
|
|
|
Hydraulic system
|
function
|
The workpiece side is pressed tightly, and the R-axis and W-axis are hydraulically balanced
|
|
Hydraulic pump pressure / flow
|
7Mpa/25L+33L/min
|
|
|
Motor power of hydraulic pump
|
3+4kW
|
|
|
Chip removal and cooling
|
Chip conveyor type
|
Flat chain
|
|
Chip removal speed
|
1m/min
|
|
|
Chip conveyor motor power
|
2×0.75kW
|
|
|
Cooling pump motor power
|
0.45kW
|
|
|
electrical system
|
Numerical control system
|
PLC
|
|
Number of NC axes
|
8
|
|
|
Total power of machine tool
|
About 47kw
|
|
|
Overall dimension (L × w × h)
|
|
About 26 × 4.5 × 4.2m
|
|
Weight
|
|
About 50t
|
Our Service
* Inquiry and consulting support. * Training how to instal the machine,
* 24 Hours on services Phone, email and in person support training how to use the machine.
* View our Factory. * Stay in touch with the customers even after
* Electrical & mechanical technical support the deal. never ignore their calls.
* Parts ordering * Engineers available to service machinery
overseas.
Jinan Liaoyuan Machine Co is located in Jinan, Shandong province of China. Our company is a one of the world leader Manufacturers in CNC machine tools. Jinan Liaoyuan has focused on top quality CNC machine products for over 20 years in China. We started as a small operation, but now have become one of the leading suppliers in the CNC machine industry in Shandong. We are a manufacturer and trader specialized in the research, development and production of all kinds of CNC machine, such as: CNC Angle Steel Punching machine, CNC Angle Steel drilling machine, CNC Plate Drilling Cutting machine, CNC Beam Drlling Marking Beveling machine, CNC Band Saw Cutting Machine and all kinds of CNC machine center and so on. Jinan Liaoyuan Machine provide turkey solution and perfect service to satisfy your production needs.
* Founding period (1991-2008)
* Continuous growth (2008-2013)
* Innovation expansion (2013-2017)
* JINAN LIAOYUAN MACHINE today
The machines manufactured by JINAN LIAOYUAN are being used in the fields from steel structure to angle towers, metal construction, pipe, pressure vessels, ship construction, bridge construction, wind-energy, heat exchanger industry fields, and they are also offered for usage in many other different fields.
Question 1. Are you a Manufacturer or a trading company?
Answer 1. We are not a trading company,We are the top Machine Manufacturer,Which involves Raw materail casting,Machine body processing,Machine assembling,Painting,Machine quality Inspecting and etc.
Q 2. What is the minimum quantity for order ?
A2: Normaly One Set. and We will give some discounts if you can buy one complete set of Machine.
Q3. Do you have stock products ready to deliver?
A 3. We have many machines in stock, So We can guarantee the fast delivery time
Q4. How do you deliver the finished products?
A 4, For FCL, We delivered by Sea
For LCL, We delivered by Sea and by Plane for only urgent requirement
For Spare Parts,We delivered by Courier,TNT, FEDEX,DHL,UPS,EMS, and Etc.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}